2020 Chevy Traverse Lug Nut Torque (2024)

FAQs

What is the torque on the traverse lug nuts? ›

The recommended lug nut torque for the Chevrolet Traverse is consistent across all model years: 2009-Present Chevrolet Traverse: 140 lb-ft.

2007-2018 Chevy Silverado 1500: 140 lb-ft. 2019-2021 Chevy Silverado 1500: 140-150 lb-ft (Depending On Model) 2011-2021 Chevy Silverado 2500HD/3500HD: 140 lb-ft (single rear wheel)/165 lb-ft (dual rear wheel)

M14x1. 5 Open End Bulge Acorn Lug Nut - 19mm Hex - 60 Degree Cone Seat. Crafted with precision machined threads to ensure a perfect fit and cold forged steel for extra strength.

It depends on the car model, rim size, design (aluminium or steel rims) and number of bolts. It is normally between 110 N⋅m and 120 N⋅m. If you change the rims on your car, you will find the new torque values in the rim certificate.

Most vehicles have lug nuts that require around 100 pound-feet of torque, but some vehicles require more or less. It's best to check your vehicle's manual to find out the exact specifications you need. You should properly torque your lug nuts when installing new wheels and after driving 50 to 100 miles on new wheels.

What bolt pattern does the Chevy Traverse have? Newer generations of the Chevy Traverse feature a 6x120 bolt pattern, although models before 2018 came with a 6x132 bolt pattern. While these aren't the most common lug configurations on the road, they still come with plenty of available options.

If the question “what size of sockets for lug nuts should I use” comes to your mind; the most common socket sizes for lug nuts are 17 mm, 19 mm, 21 mm, and 22 mm, all available at Olsa Tools. The 11/16-inch, 3/4-inch, 13/16-inch, and 7/8-inch SAE socket sizes also are fairly common.

M14x1. 5 Dual Thread Wheel Lug Nut for Chevy/GMC - 9591772 9595175.

As hard as you can while still being able to loosen them by hand, and not so hard as to damage the threads of the bolts or nuts. There are prescribed torque settings you can use if you've got an accurate torque wrench and your vehicle's owners manual, but the above rule of thumb works in most instances.

How much torque for lug nuts impact wrench? ›

This ensures you have plenty of power to break them loose. For most passenger vehicles equipped with standard lug nuts, a 1/2 inch drive impact wrench providing around 300-400 ft-lbs of torque is sufficient. This covers common lug nut sizes of 14-21 mm on sedans, coupes, hatchbacks and some light trucks or SUVs.

Where To Find The Correct Manufacturer Recommended Torque Specs. The torque specs for the axle nut (and other nuts and bolts) should be listed in the dealership/shop guide provided by the manufacturer. If you can't find that information, or if you don't have a guide, you can find the specs in the service manual.

The torque specs you need are as fallowed:Wheel bearing hub bolts - 96 lb ft. Caliper bracket bolts - 129 lb ft. Caliper you bracket pin bolts - 20 lb ft. Wheel lug nuts - 140 lb ft.

1/2 -Inch Torque Wrench

It is the best tool if you are working with lug nuts or anywhere on the vehicle suspension. It is suitable for large bolts and nuts like those in engine mounts. Basically, any tightening task for both transmission and suspension, including motorcycles, would require a 1/2 -inch torque wrench.

This ensures you have plenty of power to break them loose. For most passenger vehicles equipped with standard lug nuts, a 1/2 inch drive impact wrench providing around 300-400 ft-lbs of torque is sufficient. This covers common lug nut sizes of 14-21 mm on sedans, coupes, hatchbacks and some light trucks or SUVs.