Testing various WiFi routers is starting to become an informal hobby of mine. Although I recently removed multiple WiFi routers from my home and consolidated all of my SSIDs under one name to make things simpler, I do have two NETGEAR routers running currently, the Nighthawk X8 (my primary router – see my review here) and now a NETGEAR Orbi(model RBK50) which provides additional coverage in other areas of my house. The Orbi was added so I could experience a new trend in WiFi- mesh networks. So I decided to “mesh” around. (Sorry.)
Before I dive into my review of the NETGEAR Orbi, let’s talk a bit about what a mesh WiFi network is. With a traditional WiFi router, your wireless network is broadcast from a single source, namely the router. Technology has evolved a bit with traditional routers, with new WiFi standards emerging. The latest mainstream standard is 802.11ac which many modern devices now have. There is a new standard coming, 802.11ad, and a few routers are emerging that support that, but for now, the 802.11ac router is the one to really consider the best for right now.
Disclaimer: I am a NETGEAR Ambassador and I received thisproduct in exchange for my honest, unbiased opinion and review.
With the Nighthawk X8, it’s pretty easy for me to blanket most of my small (1600 sq ft) home in WiFi goodness. However, at the edges of the home, in my garage, and in my garden area, the WiFi signal is pretty spotty (which is to be expected). But, I wanted to extend my WiFi range a bit further in order to get strong coverage in my garage and garden (to support some NETGEAR Arlo security cameras I have).
Options to Extend your WiFi Coverage
So, I had a couple of options. Option 1) For starters, since I ran Ethernet cabling to my garage, I could simply put another WiFi router out there. To make things simple, I could set the same SSID as my main Nighthawk X8. In this case, you would want to set the WiFi router as an Access Point. An Access Point is similar to a regular WiFi router but some of the features are not available. For example, you would not want the Access Point to be a DHCP server (assigning IP addresses to devices on your network). You normally only want one router doing this management. This is the path that many people take, provided they have an Ethernet connection.
Option 2) I could set up a wireless Extender or Repeater. The idea behind these is they can grab an existing Wifi signal and then amplify it to extend the range of the WiFi signal. There are some drawbacks to this. It is only slightly worse than the best signal it is grabbing. So while you may have full bars of signal when attached to the Extender’s signal, the actual speed and throughput will be dramatically less, which is normally not that desirable.
Now there is a new option, Option 3) known as Mesh WiFi. There are several providers who have recently entered this space. Some of these are managed meaning the Mesh router has to log into the router manufacturer’s mothership and you authenticate with them, and there are others like the NETGEAR Orbi that allows you to directly manage the device.
Mesh WiFi routers like the NETGEAR Orbi come with 2 or more actual devices. There is a primary device that connects to your LAN (Ethernet network) and then satellites that connect to the main mesh device and then extends the WiFi signal. You can think about Mesh routers as Extenders on steroids. Where extenders tend to have reduced throughput and speeds, Mesh routers seem to retain much faster speeds. But, not every Mesh router/satellite combo works the same. NETGEAR has an interesting page talking about the comparison versus Google WiFi and Eero. (Yes, it is marketing material, but the tests were done by an independent vendor).
What sets the NETGEAR Orbi apart from others is the fact that it is a Tri-Band Mesh router. One of the bands is dedicated to connecting directly with the satellite and nothing more, while the other two bands are for devices that connect and use the WiFi. With the NETGEAR Orbi, the dedicated channel is a 1.7GBps 5MHz one. There is an informative knowledge base article about this on the NETGEAR site.
Are you a WiFi expert now? (I’m still trying to figure it all out and I geek out on this stuff a lot!) Anyway, let’s take a look at the NETGEAR Orbi and the features.
Setting Up the NETGEAR Orbi
For most people who are looking to upgrade their WiFi environment, you are probably weighing the options between just a simple WiFi router and one of these new Mesh routers. The Mesh routers are typically a bit more expensive because you get a much wider coverage, easy setup and management, and faster throughput (versus older or less-expensive routers). A typical home of about 2000 square feet should only need the 2-pack Orbi (the router and one satellite). You can easily add another satellite and connect it into your Orbi mesh later if you need to.
The nice thing about the NETGEAR Orbi is the setup. It’s extremely easy to do using either a mobile app or the router’s website. I took a slightly different approach though, simply because I didn’t want to set the NETGEAR Orbi up as a full router, but rather as an Access Point (without the DHCP setting). For me, that setup was even easier. (Note: the steps below are just for the Access Point setup – if you are completely replacing your WiFi environment, there is a wizard that helps you along and it is a lot less involved than what I show below)
I actual took my own route to set the Orbi up. Instead of plugging into the WAN (the Ethernet connection from the modem) or even my LAN, I decided to configure my Orbi first. So I just plugged in the power to the Orbi router and headed over to the configuration screens.
Using just my iPhone, I went through the various initial setup screens.
It detected that I hadn’t connected to the Internet but I was able to proceed.
I also had the satellite plugged in as well (for the setup I had it next to the router).
The router was able to detect the satellite and “mesh” it together.
Once you do that, you set up the Admin name and password for your Orbi system.
I then set a single SSID for both the 2.4 GHz and 5 GHz bands. Later, I set that SSID as the same as my main router just so that I wouldn’t have to think about it. But initially while I was testing, I had it set to something distinct.
After I had set up my SSID, I switched over to a web browser on my Mac so that I could go through the other configuration screens. When you log into the Orbi, you are greeted with the home tab which gives you a quick update as to the status of your environment.
From there, you can change your WiFi settings as you see fit, including setting the channels. You should note that on this screen, the 2.4GHz and the 5GHz channels have the same SSID.
The Advanced tap show much more details about the WiFi and various connections.
And within the Advanced section, you can see you can truly fine-tune with WiFi settings to your liking.
I then set the Orbi router to Access Point mode. By default, the NETGEAR Orbi is set to Router mode which means that it connects directly to the Internet and will act as your primary router. As I mentioned, I already had a primary NETGEAR router connecting to my modem so setting it to AP Mode (Access Point mode) is what I wanted.
And I gave the Orbi router a static IP address so that I could easily access the configuration screens later. You do have the option to let the Orbi router simply get the IP address from the primary router, but I like knowing and setting my IP addresses on routing devices.
So I changed it to a fixed IP address and filled in the appropriate information (the Gateway IP address is that of my primary router and since that router is setting the DNS, I put it into the Orbi’s DNS setting).
There were a few reboots during this process but after that, everything was working to how I wanted it. The Orbi was using the SSID of my other router so nobody in my family would need to change WiFi’s. Having newer routers means that the handoff is much more seamless. As the signal from one source gets weaker, the attached device usually is able to connect transparently to a stronger and faster signal.
Another nice thing about the NETGEAR Orbi is that firmware updates are fairly regular as new features or fixes are pushed out. Under the Administration > Firmware Update setting, you can automatically check for and update firmware for both the router and satellites.
Using the NETGEAR Orbi
Once you have everything configured to your liking, you can move the Orbi Satellite to a different location. The Orbi Satellite does indicate to you how good of a connection it has with the Orbi Router via a light on the top. If the light is Blue, it is successfully synced and has a strong connection. If the light is Amber, it is still synced but the connection is only fair (and you may want to consider moving the Satellite closer to the Orb Router or positioning it differently). If the light is Magenta, you do not have a connection with the Orbi Router and you need to resync it.
Resyncing is quite easy. Just press the Sync button on the back of the router and then wait a minute or two and do the same thing on the Satellite.
After you have a strong connection between the router and the satellite, your work is pretty much done. I do recommend that you periodically check the Admin pages and check for Firmware updates.
As you can see on the image above of the back of the Orbi satellite is the fact that it comes with a 4-port Ethernet hub. This is also a big differentiator between some of the other Mesh vendors. This allows you to physically connect other devices that might not have WiFi capabilities, or if you want a slightly faster connection option.
In fact, in our bathroom, I have an Apple TV and a monitor configured and I placed the Orbi satellite in there and wired in the Apple TV.
Once you have everything set up to your liking, you can pretty much just enjoy more WiFi coverage in your home. If you still encounter dead zones within your home, you can either try moving the satellite to a different location or optionally buy another Orbi satellite.
The 2-piece NETGEAR Orbi satellite retails for $399.99 and that comes with the router and one satellite. It is currently available on Amazon for $349.99. If you want to get an additional satellite for an existing setup, it has an MSRP of $249.99 (or on Amazon for $213.49). You can, if you want, purchase just the Orbi router for $196.00 on Amazon.
And if you have a larger home, there is a 3-piece Orbi system available for $594.70 on Amazon. This has the main router and two satellites.
[easy-tweet tweet=”I now understand different #WiFi options including #mesh from @HighTechDad’s Review of @Netgear #Orbi” via=”no” usehashtags=”no”]
Overall, while a bit expensive if compared to a traditional WiFi router, the NETGEAR Orbi is a leader within the Mesh WiFi space. It’s extremely easy to set up and configure, has a compelling and unique design, and does a great job blanketing WiFi across homes. It’s one of those set it and forget it devices (apart from regularly checking for firmware updates). Trust me, your family will be pretty happy to have fast WiFi access wherever they are in your home.
Disclosure Text : I have a material connection because I received a gift, sample of a product or service, and/or monetary compensation for consideration in preparing to review the product/service and write this content. I was/am not expected to return this item or gift after my review period. All opinions within this article are my own and are typically not subject to the editorial review from any 3rd party. Also, some of the links in the post above may be “affiliate” or “advertising” links. These may be automatically created or placed by me manually. This means if you click on the link and purchase the item (sometimes but not necessarily the product or service being reviewed), I will receive a small affiliate or advertising commission. More information can be found on my About page.
HTD says: Having fast, reliable WiFi throughout your home is a must these days. Another must is eliminating any types of dead zones. The NETGEAR Orbi gives you all of this and more in an easy-to-use device.
HighTechDad's Ratings
- Ease-of-Use
- Family-Friendly
- Price Point
- Features
4.3
Summary
Having fast, reliable WiFi throughout your home is a must these days. Another must is eliminating any types of dead zones. The NETGEAR Orbi gives you all of this and more in an easy-to-use device. After using the NETGEAR Orbi for a couple of months now, I can truly say that there are fewer dead zones in my house and WiFi has been fast and reliable. With an easy setup and good capabilities, this Mesh WiFi router is solid. Remember, it is expensive but is an investment in happy WiFi users at home.
- Advertisem*nt -
- Advertisem*nt -
- Advertisem*nt -